How to Install LVP Flooring: A Quick and Simple Guide

When you decide to put in vinyl plank flooring, it’s an affordable and easy choice. Properly installing the floor is crucial to ensure it stays in place and complements the design of the room.

First, collect all the tools and materials you need.

Next, prepare the subfloor by cleaning it and making sure it’s flat and ready for the new floor. Install the vinyl over a one-layer thick existing floor and consider factors such as acclimation, subfloor irregularities, cutting the flooring, and using recommended underlayment for the existing floor.

But before you start, it’s important to plan the layout and think about the underlayment. This will help you avoid mistakes and make sure your floor looks great when it’s done.

Keep reading for important tips on doing this right.

Key Takeaways

  • Measure the room carefully and decide how to arrange the planks based on where the light comes from and what part of the room you want to highlight.
  • Make sure the floor underneath is flat, clean, and dry before starting. Ensure you have a smooth surface by removing any obstacles and leveling the subfloor.
  • Put down the underlayment smoothly and make sure all joins are sealed to keep out moisture.
  • Begin placing planks along the longest wall, and use small spacers to leave room for the planks to expand.
  • Use a straight edge and a pencil to mark where the plank needs to be cut. This will help ensure precise cuts.
  • Cut the planks to fit corners and edges neatly using a sharp knife and a ruler.

Required Tools and Materials

Before you start putting in your vinyl plank flooring, make sure you have all the tools and materials you need for an easy job. You’ll need a tape measure, utility knife, rubber mallet, and a square. Use a tapping block to ensure the planks are flush with each other and to prevent the entire floor from shifting. Use spacers to keep the planks straight as you lay them down.

It’s also important to have a good underlayment, which makes the surface smooth and helps reduce noise. If your planks don’t snap together, you’ll need some glue too. Getting everything ready before you begin saves time and avoids extra trips to the store. So, check your list again, and let’s get started!

Floor Layout Planning

To get a professional-looking floor, carefully plan your floor layout by choosing a pattern that looks good with the size and main features of the room. Start by identifying the main focus of the room, like a fireplace, a big window, or the main door. This choice will help set the mood!

Here are some simple tips to help you start:

  • Measure the room well to avoid any unexpected issues.
  • Address irregularities in the subfloor and leave adequate spacing around the edges when covering the existing flooring.
  • Think about where the light comes from; having planks go in the same direction as the light can make the room look better.
  • Plan for extra materials; keep some extra planks for any mistakes or future fixes.
  • Choose a starting point that reduces the need for cutting and suits the shape of the room.

Follow these steps for a beautifully laid out floor!

Subfloor Preparation

Before you start laying your floor, check that the subfloor is level and clean to ensure a smooth installation. Vinyl plank flooring can be installed over existing floors if the surface is flat and clean. If you notice any uneven areas, you need to make them even. You can use a filler for minor bumps, and for bigger problems, you might need to sand it down or add a new layer of plywood.

Remember to clean the floor well by sweeping and vacuuming; even tiny bits of dirt can cause issues later. Aim for a smooth surface. Also, check for any moisture in the subfloor. If it’s too wet, you need to dry it out before you continue.

Taking time to prepare the base properly is crucial for a great-looking floor.

Underlayment Installation

Installing underlayment is your next step. It creates a smooth surface that helps your vinyl plank flooring last longer and feel more comfortable.

Here’s how to do it:

  • Pick the Right Material: Choose an underlayment that fits your needs—foam, cork, or rubber are good choices.
  • Roll it Out: Start at one side of the room and roll out your underlayment. Make sure it lies flat.
  • Cut Off Extra: When you get to walls or other obstacles, cut the underlayment to fit.
  • Seal the Seams: Use tape to cover the seams between underlayment pieces. This stops moisture from getting in and keeps it all connected.

With your underlayment in place, you’re ready to move on to laying down your vinyl flooring!

Starting Your First Row

With your underlayment ready, it’s time to start putting down your first row of vinyl plank flooring. Choose the longest, straightest wall to help you align the planks. This wall is usually on the outside of the house and helps make sure your floor looks straight from the start. Use a straight edge to ensure the planks are aligned properly.

Begin at the main corner of the room to help keep all the other rows straight as well. Place the first plank at the corner, making sure it lines up well with your chosen wall. Use small spacers between the wall and the planks to keep a uniform space. This space is important because it lets the floor expand and move naturally.

Continue to add planks next to each other, pushing them close to make sure there are no gaps between them.

Cutting and Fitting Planks

When you lay your flooring, you’ll need to cut planks to go around corners and other things in the way. Here’s how to do this easily:

  • Check Your Measurements: Always measure twice before you cut to save materials.
  • Use Good Tools: A sharp knife or a saw with fine teeth will help you cut smoothly.
  • Draw Before You Cut: Use a straight edge and a pencil to mark your cutting line to keep your cut accurate.
  • Leave Some Space: Remember to leave a small gap around the edges to let the planks expand. This stops them from pushing against each other and buckling.

Benefits of Vinyl Flooring

Vinyl flooring has many benefits, including being strong and easy to take care of. It’s great for busy areas in your home because it doesn’t get scratched or stained easily. Cleaning it’s simple – just sweep and mop quickly.

Vinyl flooring also comes in many styles. You can find options that look like hardwood or more modern designs. It feels softer than tile or wood floors, making your room feel cozy. Plus, vinyl isn’t expensive, so it fits well within a budget for updating your home. Installing vinyl plank flooring is also advantageous as it is waterproof, durable, and cost-effective.

Post-Installation Tips

Once your vinyl plank flooring is in place, it’s important to take care of it properly. Here’s what you should do:

  • Clean Often: Use a broom or vacuum to get rid of dirt. Make sure the vacuum doesn’t have a beater bar, as it can scratch the floor.
  • Choose the Right Cleaners: Use cleaning products made for vinyl floors. Avoid strong or rough chemicals.
  • Put Pads Under Furniture: Attach felt pads to the bottoms of furniture legs to keep the floor from getting scratched or scuffed.
  • Deal with Spills Quickly: Clean up any spills right away to stop stains and water damage.

Frequently Asked Questions

How Does Temperature Affect Vinyl Plank Flooring Installation?

Be careful with the temperature when installing vinyl plank flooring. If it’s too cold, the planks may not stick properly or could break. If it’s too hot, they may stretch too much and buckle.

It’s best to keep the temperature moderate, between 65 and 75°F. Also, make sure the temperature in the room has been steady for at least 48 hours before starting. This helps avoid any unexpected problems!

Can Heavy Furniture Be Placed Immediately After Installation?

Don’t put heavy furniture on new floors right away. Wait for about 24 hours if you used glue to lay down the floors. This helps the glue dry and keeps the furniture from hurting the floor.

If your floor isn’t glued down, you can wait a bit less, but it’s still best to wait a little before placing heavy items.

What’s the Ideal Humidity Level for Installing Vinyl Planks?

You’re right to ask about the best humidity for putting in vinyl planks! Keep the room’s humidity between 35% and 65%. This stops the planks from bending or having gaps.

If you’re installing them yourself, let the flooring get used to your home’s conditions for about 48 hours first. Doing this makes the installation go more smoothly.

How Do Vinyl Planks React to Long-Term Sunlight Exposure?

When vinyl planks are in the sun for a long time, they can fade or bend. If they get a lot of direct sunlight, it’s worse.

To protect your floors, use blinds or UV window film. This helps block some sun and keeps your floors looking good for a long time.

It’s an easy solution to keep your area nice.

Are There Specific Cleaners to Avoid on Vinyl Flooring?

You should avoid strong cleaners. Don’t use products with ammonia or rough scrubbers as they can harm your vinyl flooring.

Use soft, pH-neutral cleaners to keep your floors clean without damaging them.

A mix of water and mild detergent is usually enough to keep your vinyl looking good and shiny.


And that’s it! You’ve now installed a strong, good-looking vinyl floor that can handle everyday use. Pay attention to the little things, and take your time with each step.

Take a look at what you’ve done—your room looks great! Enjoy your hard work, and remember, sweeping and sometimes mopping will keep the floor clean and shiny.

Happy flooring!

Related posts